Glotech™ Mask Pro

quick start guide

01

Charge the controller using the supplied cable. Insert the small end of the cable (USB-C) into the controller. Insert the large end of the cable (USB-A) into a wall plug.

Once charged the indicator light will be steady green. Detach the controller from the charging cable before plugging it into the mask.

Instruction step
02

The controller must be charged on its own (not attached to the mask) as this may cause damage to the battery. Unplug the controller from the charging cable before plugging it into the mask.

NOTE: The mask will not work if plugged into the controller while the controller is charging.

Instruction step
03

Connect the mask to the USB-A end of the controller using the built-in cable on the mask.

Your Glotech™ Mask Pro is operated by the supplied controller, making it completely portable.

Instruction step
04

Adjust the velcro strap to fit snug but comfortably on your face.

You may find that placing the strap higher on the crown of your head (above a ponytail) makes it more comfortable and secure.

Instruction step
05

To turn on your mask, press the button on the controller for 2+ seconds.

The default mode is anti-aging. To switch to anti-acne, short-press the button.

To turn off your mask before the auto 10-min timer, press the button for 2+ seconds.

Instruction step

Don't want to read?

WATCH THE HOW-TO VIDEO

Frequently asked questions

It's effective, easy, and, best of all, safe. Follow these tips to get the most out of your Glotech™ Mask.

  • To start, we recommend using your Glotech™ mask 5-7 days a week for optimal results. One treatment lasts 10 minutes and your mask turns off automatically after that.

    If desired, you may complete up to two treatments per day (either using different light modes or doing two of the same).

    We designed Glotech™ devices to fit seamlessly into your daily routine. All devices are wireless and rechargeable so you can multitask while getting a clinical-grade skincare treatment!

    After 4-6 weeks, when you are seeing your desired results, you may reduce to maintenance treatments 2-4 days per week.

  • You can do up to two 10-minute sessions in one day. We recommend combining Red (630nm) and Blue (415nm) light for Mask Pro and Mask Lite, and Red (640nm) and Blue (465nm) light (both ±10nm) for Mask Lite 2.0. You can combine treatments either back-to-back or at different times of the day. Red light works to relax and sooth so it is recommended at night, while blue light can be energizing so we recommend using that setting earlier in the day.

  • Most people notice smoother, brighter-looking skin within two weeks. Softer lines and fading spots follow over weeks 3 to 6 with daily use.

  • LED devices are classified by the FDA as possessing “non-significant risk”. The LEDs emit no UV light, so there is no risk of sunburn or skin cancer. If you have light sensitivity or are taking medications that can cause light sensitivity, it is not recommended to use this mask. Please see questions below about precautions and contraindications.

  • We recommend speaking to your doctor first if you are pregnant, undergoing chemotherapy, have epilepsy or photoallergy or are taking any of the following medications: steroids injections, cortisone injections, medications causing light sensitivity (such as Tetracycline).

    Glotech devices are intended for adults age 18 and over.

  • 60 DAY RISK-FREE TRIAL
  • FDA CLEARED
  • DERMATOLOGIST APPROVED